If you live in Savile Town, Thornhill or anywhere else in Dewsbury, we can quote for resin driveway installation; we also cover nearby Batley, Ossett and Heckmondwike. If the drive needs a dropped kerb, the application goes to Kirklees Council as the highway authority; we help with it and keep front-garden surfaces within the permeable-surface rules.
Resin driveways have gone from a rarity to one of the most asked-about surfaces in Dewsbury in the space of a few years, and Dewsbury Landscaping & Driveways installs both kinds: resin-bound, which is trowelled on as a thick porous layer, and resin-bonded, which is a thin scattered-stone coating over an existing surface. This page explains the difference, because the two products share a name and little else, and sets out how we prepare the base, mix the resin and finish the surface so that it stays smooth and colour-fast. It is written for Dewsbury homeowners comparing resin driveway installation with block paving, tarmac or concrete.
The appeal is easy to see. A resin-bound drive has no joints for weeds, no loose stones to kick across the lawn, a wide choice of natural aggregate colours and a smooth, slightly textured finish that is comfortable to walk on. Done properly, with a UV-stable resin on a sound base, it drains freely and looks the same for years.
Done badly, it cracks, yellows or lifts, and the base underneath is nearly always the culprit. We lay resin on bases we have built or inspected ourselves and give a written guarantee on the finished surface.
Where We Offer Resin-Bound Driveways
A resin-bound driveway is made by mixing kiln-dried natural aggregate with a clear two-part polyurethane resin in a forced-action mixer, then hand-trowelling the mix onto a prepared base at 15 to 18 mm for cars and 20 to 24 mm for heavier vehicles. Every stone is coated but the gaps between them stay open, so the surface is porous and rain drains through into the base below.
It is the right choice for a Dewsbury front garden where you want a smooth, decorative surface and need to stay within the permeable surface planning rules, for a drive that doubles as a path to the front door, and for anyone who dislikes the loose stones of gravel or the joints of block paving.
The base is everything. Resin-bound needs a stable, well-drained, clean surface with no movement. On a new installation we lay 150 mm of compacted Type 1 followed by an open-graded porous tarmac base course of 50 to 60 mm, which lets water through. Over an existing sound, level concrete or dense tarmac drive we can lay directly, but then the surface is not permeable and the existing drainage must cope.
We lay on a dry day above 5°C with no rain forecast during curing, using a UV-stable aliphatic resin so the colour does not yellow. Aggregate blends run from golden buff through silver-grey and slate to black, with contrasting borders available. The result depends on the base, the ratio of resin to stone and the skill of the person trowelling it.
Resin-Bonded Driveways
Resin-bonded, sometimes called scatter-coat, is a different product. A resin is spread thinly over an existing sound surface with a squeegee, and dry aggregate is broadcast over it by hand until the resin is covered. Once cured, the loose stone is swept off, leaving a textured, gravel-look finish about 3 to 6 mm thick bonded firmly to the base.
It is the right choice when you have a concrete or tarmac drive in Dewsbury that is structurally sound but looks tired, and you want to refresh it at lower cost than digging it out. It is also used on steep drives, ramps and paths where the rougher, higher-grip texture helps, and where the depth of a resin-bound build-up would cause problems at thresholds or kerbs.
Resin-bonded is not permeable. The resin forms a continuous film across the base, so rainwater runs off as it did before and the existing drains and falls must be working. It is a surface dressing rather than a new drive, so any cracks or movement in the base will show through in time.
Preparation is the key. We jet wash and dry the base, repair cracks, remove oil or old sealer, prime bare concrete and mask edges and drains. The resin is applied in sections and the stone broadcast at once, before the resin skins. The result depends on the base, the cleaning and the coverage of the stone. For many Dewsbury homes it is a good-value improvement.
What You Get When We Handle Your Resin Driveway Installation
Resin is sold hard by some companies as a quick overlay that can go on anything. It cannot. Most of the failed resin drives we are asked to look at in Dewsbury were laid over cracked concrete, fresh tarmac or an unprepared base, with a cheap resin that yellowed in a summer. We build or inspect the base ourselves, use UV-stable resin from established suppliers and will not lay on a day the weather does not allow.
Our team mixes on site in a forced-action mixer with the aggregate weighed to the manufacturer's ratios, not guessed. We work in a continuous pour across the whole area to avoid visible day joints, and we trowel edges by hand against kerbs, walls and drains. The aggregate is kiln-dried and stored dry, because damp stone is the quickest way to get a cloudy, weak resin.
You receive a written quote with the base build-up, depth and resin type stated, a written guarantee on the finished surface, legal disposal of any old surface we remove and plain advice. If your sloping plot or budget suits a tarmac driveway installation or gravel better, we will say so.
How Our Resin Driveway Installation Works
- Survey and base assessment. We check whether an existing surface is sound enough to take resin or whether a new base is needed, and discuss bound versus bonded, colours and drainage.
- Written quote. An itemised quote covers base work, depth, resin type, aggregate blend and edging, with a start date.
- Base preparation. For a new drive we excavate, compact Type 1 and lay a porous tarmac base course; for an overlay we clean, repair and prime the existing surface.
- Edges and drainage. Block paving, steel or aluminium edge trims are fixed to give the resin a clean stop, and any channel drains or gullies are set to the finished level.
- Mixing. Resin and dried aggregate are batched by weight in a forced-action mixer and taken straight to the laying area.
- Laying. The mix is spread to depth and trowelled smooth in a continuous pour, or for bonded, the resin is squeegeed on and the stone broadcast at once.
- Curing and handover. The surface is protected while it cures, usually overnight for foot traffic and two to three days for cars, then checked and handed over.
A resin driveway installation in Dewsbury with a new base takes about a week, with the resin itself normally laid in a single day.
Resin Driveway Installation in Dewsbury: What Changes the Price
Whether a new base is needed is the biggest question. Laying resin-bound over an existing sound surface in Dewsbury is far less work than excavating and building a new sub-base and porous tarmac base course, but only a minority of old drives are good enough to take it. The survey settles this.
Area and depth follow: a thicker 20 mm or more build-up for vans uses more resin and stone than 15 mm for cars. Aggregate choice affects the price, with standard buffs and greys at one end and premium marble or imported stone at the other. Resin-bonded uses far less material than resin-bound and sits at a lower cost, but it depends on the existing base being sound.
Edging type, border details in a contrasting colour, drainage work, the number of cuts around manholes and drains, and access for the mixer and materials all feed into the quote. Weather can also add a day if a pour has to be postponed, though that does not usually change the price.
Resin Driveway Installation Around Dewsbury
Resin-bound has become a favourite with homeowners in Ravensthorpe and Earlsheaton who want a smooth, modern frontage that stays permeable. If your front garden in Thornhill is small and every square metre is parking, it works well, and the lack of joints keeps weeding to nil. In Chickenley we lay plenty of resin-bonded refreshes over tired concrete, and if your home in Savile Town is newer, we can pick a resin-bound colour that matches the render and brick. We cover all of Dewsbury and nearby Batley, Ossett and Heckmondwike.
Related services we offer across Dewsbury include concrete driveway installation.
Frequently Asked Questions
What is the difference between resin-bound and resin-bonded?
Resin-bound mixes the stone with resin and trowels it on at 15 mm or more, giving a smooth, porous surface. Resin-bonded spreads resin thinly over an existing surface and scatters dry stone on top, giving a rougher, non-permeable finish a few millimetres thick. Bound is a new surface; bonded is a dressing for a sound old one.
Is a resin driveway permeable?
Resin-bound is permeable provided the base beneath it is also permeable, usually open-graded tarmac over a stone reservoir. Laid over solid concrete it still lets water through the resin but the water has nowhere to go. Resin-bonded is not permeable at all. We design the base so that your Dewsbury front garden meets the planning rules.
Will a resin driveway fade or go yellow?
Cheaper aromatic resins yellow in sunlight within a year or two, which is why some resin drives look patchy. We use UV-stable aliphatic resin that holds its clarity, so the stone colour you choose is the colour you keep. Natural aggregate does not fade, though a light-coloured drive will show dirt sooner and benefit from an annual wash.
Can resin be laid over my existing driveway in Dewsbury?
Only if the existing surface is sound, level and well-drained. Concrete needs to be crack-free and primed; tarmac must be firmly bonded and at least a few weeks old. If the surface moves, is sinking or is breaking up, resin will follow it. We assess every base during the survey and tell you honestly whether an overlay is viable.
How do I look after a resin driveway?
Sweep it regularly, wash it with a hose or low-pressure jet wash to keep the pores clear, and remove leaves before they stain. Avoid dragging heavy metal objects across it and keep skips and jacks on boards. Moss or algae in shaded areas can be treated with a mild cleaner. A resin-bound drive needs no sealing or re-sanding.